£13.20 inc.Vat | £11.00 ex.VAT

25m Co-polymer Stranding.

£24.00 inc.Vat | £20.00 ex.VAT

50m Co Polymer Stranding

£66.00 inc.Vat | £55.00 ex.VAT

This versatile and easily adaptable item has many uses when chimney sweeping problematical flues or when duct cleaning horizontal shafts.

This mid-rod head can be quickly altered between stainless steel cables and nylon strands dependent on the use required. You change the infill by simply releasing pressure on the grub screw and re-threading your desired strand and re-tightening the grub screw.

You must never use this item as a leading head

The mid-rod head can be used between rods or directly behind a head/brush. It has been designed so that when you sweep a flue which can have ledges, and particularly when removing a nest, you can add this head between rods to ensure the safe passage of debris through the whole flue and will lessen the change of the dislodged nesting material reforming further down the flue and in particular upon ledges.

It is also a great aid when generally sweeping a doglegged flue with one or more bends/ledges where deposits can re-accumulate. It is advisable to use a marker rod behind this devise so you know where you have used them when bringing this item back down a flue.

When duct cleaning horizontal flues, rods (over a distance) can sag and bottom out on the floor of the shaft. This alters the centralisation of the head and allows the rods to go from side to side. When using this item it will allow the head to remain centralised to the shaft.

£9.60 inc.Vat | £8.00 ex.VAT

Replacement strand for the Rodtech Wire Loop

£62.40 inc.Vat | £52.00 ex.VAT

This zipped rod bag comes from talking to sweeps and asking what they want? *Rods in images are for illustration purposes only*

£46.80 inc.Vat | £39.00 ex.VAT

This specially designed rod bag is made from thick, hard wearing double stitched canvas with a thick reinforced base and a shoulder strap for ease of transport.

£20.40 inc.Vat | £17.00 ex.VAT

The Rodtech power brush cover is designed fit over your heads to stop soot from dropping off whilst being transported.

£11.40 inc.Vat | £9.50 ex.VAT

Designed to make sweeping easier and cleaner. The rod travels through the tube and the vacuum fits on the side of the T piece keeping the rods clean.

£10.92 inc.Vat | £9.10 ex.VAT

1.4m to 2.6M sprung loaded extending poles.These sprung loaded poles are ideal for holding soot sheets in place for chimney sweeping.

£5.76 inc.Vat | £4.80 ex.VAT

Four lots of 600mm strands should keep your brush in top condition for 1 year. The strands are co-polymer which aid the sweeping of flues and ducts cleanly.

£3.82 inc.Vat | £3.18 ex.VAT

The Rodtech 600/300mm replacement Super Scrub Deluxe Co-polymer. Six sided strands with flat sides to enhance the cleaning process.

£2.88 inc.Vat | £2.40 ex.VAT

300mm  Co-polymer Whip Replacement Strands. Can be used in either Power Brush or Super Scrub Heads 300mm (12 inch)