The Rodtech Click Standard Kit is designed to allow you to power sweep and traditionally chimney sweep lined and unlined flues with a range from 125mm (5 inches) up to 500mm (20 inches) and above The flue brushes will allow you to sweep all types of flue cleaner than you can by using a traditional chimney brush. This professional chimney sweep equipment is not designed for the amateur chimney sweeper in the kit form. The kit description (below) mainly uses the metric system, so should you not sweep chimneys in the UK, you may need to convert to imperial measurements. We have tried to describe the chimney sweeping equipment to the best of our ability and included as much application as is possible.
There are chimney sweeping courses available from us, which can give more practical advice and hands on experience on all of our professional chimney sweeping tools.
Should you purchase this kit, you will have the ability to add yourself to our find a sweep section on our website to gain more customers. We have found that the householder wants his chimney clean, with the minimum of fuss and hassle, done in a clean and professional manner by a competent professional using professional chimney cleaning tools.
All of our Rodtech Click Power Sweeping Equipment comes with a 12 month warranty (subject to warranty terms and conditions as found in our user manual https://www.rodtechuk.com/user-manual.html).
Each selection of rods covers 10M allowing adequate height for most homes and includes the 12mm, 15mm and 18mm. This will allow you to sweep from 125mm (5 inches) and upwards with rod thickness to some of the largest household flues. These rods are able to be used for rotary sweeping as well as manual chimney sweeping. All of the Rodtech Click power sweeping brushes connect to all of the Rodtech Click rods enabling maximum flexibility when choosing the correct chimney cleaning tools for the required application.
The 12mm rods are mainly used for lined flues associated with stove cleaning, but they can equally be used in ductwork cleaning. When using this chimney sweeping equipment for chimney flue cleaning you will ideally use the 300mm power brush or the 300mm Super Scrub chimney liner brushes.
The 15mm rods are primarily used for power sweeping flues 200mm and above. It would be considered normal to use the 600mm power sweeping brush or 600mm Super scrub brush in this configuration. These rods and associated heads have been found to work brilliantly as part of air duct cleaning equipment.
The 18mm chimney sweeping rod is much stiffer than the other rods, and are mainly used in straight flues greater than 300mm, Inglenooks and as part of duct cleaning equipment.
All of our Rodtech Click rods connect to all of the power sweeping brushes (with the exception of the mini click system)
The 300mm Super Scrub will enable you to sweep lined and unlined appliances from 150-200mm.
It will also allow you to remove heavy tar deposits in Stainless Steel lined Flues, together with removing nesting debris in steel lined flues. This head will also allow you to clean tar from Bird Guards.
The 300mm Power Brush will enable you to sweep lined and unlined appliances from 125-200mm. This head is very good as its design will allow you to sweep through narrow entrance gaps such as throat plates and baffles.
This head will also allow you to clean tar from Bird Guards. Both this and the 300mm Super Scrub will make a flue liner cleaner than traditional flue liner equipment used in hand sweeping.
The 600mm Power Brush will allow you to sweep from 200-500mm (8-20 inches), its design enables you to get through some tight baffles and throat plates with ease. The ease in which this product can be used making sure the flue is rotary power swept is only made better by the way you can easily change the strands making sure your equipment stays in tip-top condition.
The Bird Nest Remover has two main uses; as a bird nest remover also as a creosote and tar remover on all flues other than steel lined.
The Chain tar removing tool is specifically designed to remove tar and creosote build-up within clay lined flues and from chimney pots. It has also been found to be an excellent bird nest remover in these types of liners. It is not to be used in Stainless steel liners or unlined flues.
The retrieving tool will allow you to hook chimney sweeping brushes and chimney sweeping rods left by amateurs as well as being able to dislodge nesting debris if required.
The power sweeping drill bits come with and without buttons dependent upon your method of sweeping.
This Standard kit will allow the professional to sweep nearly all domestic flues, even where access is sometime limited, it comes with 1 rod bag, 1 head cover, and spare Strands for every head supplied. This kit can be expanded upon at any time, but is a very good base that will cover most day to day work encountered. We do supply adaptors that will connect ButtonLok, Rovac and ProKlean products to our equipment.
We do offer professional chimney sweep training courses and it is important that you familiarise yourself with the products by reading the manual.
The kit also comes with a 12 month warranty (subject to warranty terms and conditions as found in our user manual https://www.rodtechuk.com/user-manual.html).
The list below is what comes as standard with this Kit
|Rodtech Click 1000 x12mm Rod||£29.00||10|
|Rodtech Click 1000x15mm Rod||£30.00||10|
|Rodtech Click 1000x18mm Solid Rod||£31.00||10|
|Rodtech Click 300mm Power Brush Strands||£2.40||1|
|Rodtech Click 300mm Power Sweeping Brush||£55.00||1|
|Rodtech Click 300mm Super Scrub Brush||£68.00||1|
|Rodtech Click 600mm Power Brush Strands||£4.80||1|
|Rodtech Click 600mm Power Sweeping Brush||£56.00||1|
|Rodtech Click Bird Nest Remover||£60.00||1|
|Rodtech Click Chain Tar Remover||£60.00||1|
|Rodtech Click Retrieving Tool||£49.00||1|
|Rodtech Click Standard Drill Adapter (with button)||£22.50||1|
|Rodtech Click Standard Drill Adapter (without button)||£17.50||1|
|Rodtech Click Super Scrub 300mm Replacement Strands||£1.50||1|
|Power brush cover||£17.00||1|
Our Rodtech Click products come with a 12 month replacement Warranty. The warranty covers all Non-wearable parts and joints on our Rodtech Click range. It does NOT cover misuse of equipment or when the equipment is used with the tile breakers It does not cover parts that will wear with use, such as head inserts (Strands, Chain and Wire etc) You must read the manual for guidance. In the unlikely event you will ever need to use this warranty, you will be required to return the product to Rodtech or a Rodtech Agent before a replacement part is supplied (subject to being used in accordance with our user manual). Our products are covered by :- Patent number GB2500288. Patent Pending: PCT/GB2012/053091 also Patent Pending EP12165514.6Due to extruded plastic properties it never possible to guarantee the straightness of the rods, however they will still function to a high standard.The Rodtech Click range offers high quality products designed for power sweeping, manual sweeping (hand sweeping), drain cleaning and duct cleaning via an adapter standard chimney cleaning brushes, drain cleaning ends and duct cleaning brushes can be fitted to the click system meaning that there is no twisting the rods together and them getting locked which makes the sweeping process much quicker. The rods are solid and the ends are crimped to the rods making the best quality available.